Perun Moto - Subframe Reinforcement kit KTM690/ Husky 701
A$196.00
Subframe Reinforcement kit KTM690/ Husky 701
Fits:
- KTM690 Enduro & SMC 2014+ including 2019
- Husqvarna 701 enduro & SMC all models
Upper assembly:
- Upper bolt caps(qty. 2) are made of AISI 4140 steel, heat treated (for added strength) then zinc coated (rust protection). That makes them virtually indestructible. Size of the head is standard – 27 mm, same as front axle nut. There is M6 threaded hole for OEM bolt holding plastic fairing. Bolt cap is designed to be slim so plastic fairing is not sticking out more then it does when OEM upper bolt is used.
- Upper bolts (qty. 2 + optional 2) are 12.9 machine bolts, zinc coated. These are much stronger then OEM upper tank bolts. 25 mm long, so 15 mm is threaded into the bolt cap, when properly torqued. NOTE: in kits for 2014-on bikes additional button head bolts are provided - those are for Husqvarna 701 bikes.
Lower assembly:
- Lower bushings (qty. 2) are made of strong plastic - polyamide with molybdenum, much stronger then OEM rubber lower bushings, yet gentle enough to be in close contact with plastic tank (rubber OEM upper bushings are kept, because completely rigid tank-frame connection wont be a good thing). Slightly different size, so they fit better.
- Sleeve(qty. 1) is made of AISI 304 stainless steel, without internal thread
- Lower bolt (qty. 1) design is only difference between kit for 2008-2013 and 2014-on bikes. For 2008-2013 bikes high quality M8x140 allen head 12.9 zinc coated bolt is provided. For 2014-on bikes custom M8x155 countersunk 10.9 zinc coated bolt is provided.
- Washers (qty. 1) are standard large M8 steel zinc coated washers and nut(qty. 1) is standard M8 steel zinc coated safety nut.
Perun Moto - Heel guards KTM690/Husqvarna 701
A$130.00
Sold out
Fits:
Heel guards kit KTM690/ Husky 701 all models
- Replacement for OEM plastic heel guards,
- Milled out of 6 mm aluminum AlMg3,
- Powder coated to matte black,
- Perfect strapping points for rack-less bags
- All edges chamfered by milling machine - no sharp edges,
- Pre-drilled hole for Kriega OS-rack loop,
- Button head bolts - your boots are safe,
- High quality mounting hardware provided - 10.9 grade zinc coated bolts, small and large washers,
- Easy installation using standard tools, no modification required,
- Price is for pair (left and right).
Perun Moto Luggage Rack (suit) KTM 690 2019+
A$160.00 - A$479.00
Only a few left!
Perun moto Tail Rack suits KTM 690 2019 +
Features:
- Strong and durable design- upper made of 6 mm aluminium sheet (AlMg3 H22 - 5754) and bracket made of 5 mm aluminium sheet (AlMg3 H22 - 5754).
- Strap-friendly, chamfered, smooth edges of the rack and slots.
- Eighteen slots - strapping points for all kind of soft luggage, tool bags or small roll bags.
- Easy and seamless integration with rack-less bags
- Integrated G-hooks - made for quick mounting and dismounting of rack-less bags and easy refueling.
- Holes for Rotopax mount, for 1 gallon Rotopax fuel or water can.
- Perfectly sized - doesn't stick out - less chance to hurt rider in case of fall. Extension plate will be offered for riders in need of larger surface.
- Can be used with Vanasche Motorsport Pannier Racks
- All necessary hardware provided - high quality 10.9 zinc coated bolts and aluminum washers provided.
- High quality powder coating - matte black.
- Only 1.0 kg, including all mounting hardware.
Perun Moto - Rear Brake Master Cylinder Guard
A$99.00
Only a few left!
Fits:
Rear Master Cylinder guard kit fits all models KTM690/ Husky 701 all models
- protects exposed rear brake cylinder and brake hoses,
- allows adjustment of rear brake cylinder position (brake pedal),
- made of 4 mm aluminium
- powder coated to black,
- mounting hardware provided - high quality zinc coated 10.9 grade bolts, aluminium spacer, washers and nut,
- easy installation using standard tools, no modification required,
Perun Moto DIRECT HANDLEBAR CLAMP (28.6 MM) AMPS (suits most GPS mounts)
A$153.00
Compatibility - fits all bikes with oversized handlebars (1-1/8" or 28.6 mm) and with split handlebar clamps.
Fits on 2021+ KTM 1290 Super Adventure, 2013-2020 KTM 1050, 1090, 1290 Adventure bikes (with stock handlebar clamps).
Works perfectly with Garmin Montana and Zumo series or QuadLock phone mount.
---
- AMPS bolt pattern - for vast number of GPS and phone holders, horizontal and vertical installation possible,
- Low profile and adjustable- easy rotation adjustment (through one easily accessible front bolt) and 60 mm of forward - aft adjustment of the upper plate,
- Billet part - milled out of aircraft grade aluminum alloy,
- Durable - formed (not cut) threads,
- Handlebar safe - powder coated, not anodized, which provides smooth contact with handlebar, without scuffs (top of the line IGP Duraface powders used),
- All necessary hardware provided - high quality M6 zinc coated bolts and stainless steel M5 and M4 bolts.
Perun Moto UPPER HANDLEBAR CLAMP 38/40X90 AMPS (suits most GPS mounts)
A$153.00 - A$178.00
Only a few left!
Compatibility - Fits on majority of KTM and Husqvarna bikes with 38x90 or 40x90 bolt pattern - all MY KTM 690 Enduro and SMC-R, all MY Husqvarna 701 Enduro and Supermoto (fits on BRP sub-mounts too!), GasGas ES/SM 700, KTM 790 and 890 Adventure, KTM 1x90 Adventure bikes, Husqvarna 901 Norden and many more.
Works perfectly with Garmin Montana and Zumo series..
- AMPS bolt pattern - for vast number of GPS and phone holders, horizontal and vertical installation possible and approx. 30 mm of fore-aft positioning
- Perfectly suited for 2021+ 1290 Super adventure - enough room for "glove compartment" door to be fully opened and perfect placement of the GPS/phone relative to the dashboard,
- BRP Sub mount compatible - works with BRP Sub mount for KTM 690 Enduro and SMC-R, Husqvarna 701 Enduro and Supermoto,
- Billet part - milled out of aircraft grade aluminium-magnesium alloy,
- Durable - M4 threads for AMPS mounts are formed (not cut),
- Handlebar safe - powder coated, not anodized, which provides smooth contact with handlebar, without scuffs (top of the line IGP Duraface powders used),
- All necessary hardware provided - high quality M8 allen head zinc coated bolts and stainless M4 button head bolts.