Perun moto KTM790 Luggage Rails (pair)
Only a few left!
Fits all KTM 790 Adventure bikes.
- Minimalist side racks, mounted instead of stock rear side covers.
- Sold as a Set (pair),
- RHS can be used as a platform for Tool tube, tool roll or small roll bags (5),
- LHS can be used as a platform for Tool tube, tool roll or small to medium roll bags (5-18 litres, depending on the bag),
- LHS is perfect platform for Kriega OS-Adventure packs (OS-6, OS-12 or OS-18),
- Mosko moto Fatty tool roll fits perfectly,
- Perfect stand-off for large rack-less systems (Mosko moto Reckless 80 or Giant Loop Siskiyou), to keep them away from silencer and rear swingarm
- Lightweight - made of 5 mm aluminium,
- All edges are chamfered,
- Powder coated to matte black,
- High quality hardware provided.
Perun Moto Billet Rack (suit) KTM 790/890 Large (New)
Sold out
NOTE: Fits all KTM 790/890 Adventure R/"S"/Rally bikes. Won't fit on KTM 1X90 bikes.
Successor of our most versatile luggage rack, now even better - it provides great support for duffle bags, rack-less saddlebags or hard top cases and due to it's 3D milled feature it now sits low and flush with the stock seat.
Additional spacers for removing passenger grab handles included!
- Twenty six slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
- Reasonably large top surface - approx. 30/19 (W) x 32 (L) cm of completely flat top surface (plus flanges for easy strapping),
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - CNC milled out of aluminium-magnesium alloy, attached to the bike using M8 bolts - rack can be used to pull and push the bike,
- Perfect angle - due to CNC milled angled spacer platforms and angled countersunk holes, rack sits very low, flush with the stock seat and at the same angle as the stock seat (additional Sub plate is not needed!),
- Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 or 2 gallon Rotopax fuel or water can,
- Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - limited compatibility with plastic Givi Trekker cases - email for details,
- SW-motech top case ready - pre-drilled holes for SW-Motech adapter kit (not included - check instructions for details),
- Kriega OS-Rack Loops ready - pre-drilled and chamfered holes for Kriega OS-rack loops, for perfect mounting of Kriega bags,
- 8 mm holes for RAM mount - for GoPro or other action cameras, one hole on each flange,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and powder coated spacers,
- High quality powder coat - matte black powder coat (top of the line IGP Duraface powders),
- Weights approx. 1.0 kg, including mounting hardware.
Click the links below for more information:
Unique Features of the Perun Moto Billet Racks
Large rack verses small rack which one for you
Perun Moto Billet Rack (suit) KTM 790/890 Small (New)
Sold out
Fits all KTM 790/890 Adventure bikes.
This is our small and lightweight rack for 790/890 bikes
- Lightweight - only 400 gr,
- Low profile - sits low, close to the tail plastics; angled so it is flush with the stock seat,
- Sixteen slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
- Adequate top surface - approx. 25/13 (W) x 26 (L) cm of completely flat top surface, perfect for 5-10 liter soft bags,
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts,
- Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 gallon Rotopax fuel or water can,
- Kriega OS-Rack Loops ready - pre-drilled and chamfered holes for Kriega OS-rack loops, for perfect mounting of Kriega bags,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and spacers,
- High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
Additional spacers for removing passenger grab handles included!
Designed to be used without passenger grab handles, but it can be used with them too (caution - due to the small size of the rack, grab handles are not fully supported by the rack so use them with caution).
Click the links below for more information:
Unique Features of the Perun Moto Billet Racks
Large rack verses small rack which one for you
Perun Moto DIRECT HANDLEBAR CLAMP (28.6 MM) AMPS (suits most GPS mounts)
Compatibility - fits all bikes with oversized handlebars (1-1/8" or 28.6 mm) and with split handlebar clamps.
Fits on 2021+ KTM 1290 Super Adventure, 2013-2020 KTM 1050, 1090, 1290 Adventure bikes (with stock handlebar clamps).
Works perfectly with Garmin Montana and Zumo series or QuadLock phone mount.
---
- AMPS bolt pattern - for vast number of GPS and phone holders, horizontal and vertical installation possible,
- Low profile and adjustable- easy rotation adjustment (through one easily accessible front bolt) and 60 mm of forward - aft adjustment of the upper plate,
- Billet part - milled out of aircraft grade aluminum alloy,
- Durable - formed (not cut) threads,
- Handlebar safe - powder coated, not anodized, which provides smooth contact with handlebar, without scuffs (top of the line IGP Duraface powders used),
- All necessary hardware provided - high quality M6 zinc coated bolts and stainless steel M5 and M4 bolts.
Perun Moto UPPER HANDLEBAR CLAMP 38/40X90 AMPS (suits most GPS mounts)
Only a few left!
Compatibility - Fits on majority of KTM and Husqvarna bikes with 38x90 or 40x90 bolt pattern - all MY KTM 690 Enduro and SMC-R, all MY Husqvarna 701 Enduro and Supermoto (fits on BRP sub-mounts too!), GasGas ES/SM 700, KTM 790 and 890 Adventure, KTM 1x90 Adventure bikes, Husqvarna 901 Norden and many more.
Works perfectly with Garmin Montana and Zumo series..
- AMPS bolt pattern - for vast number of GPS and phone holders, horizontal and vertical installation possible and approx. 30 mm of fore-aft positioning
- Perfectly suited for 2021+ 1290 Super adventure - enough room for "glove compartment" door to be fully opened and perfect placement of the GPS/phone relative to the dashboard,
- BRP Sub mount compatible - works with BRP Sub mount for KTM 690 Enduro and SMC-R, Husqvarna 701 Enduro and Supermoto,
- Billet part - milled out of aircraft grade aluminium-magnesium alloy,
- Durable - M4 threads for AMPS mounts are formed (not cut),
- Handlebar safe - powder coated, not anodized, which provides smooth contact with handlebar, without scuffs (top of the line IGP Duraface powders used),
- All necessary hardware provided - high quality M8 allen head zinc coated bolts and stainless M4 button head bolts.