Perun Moto - Subframe Reinforcement kit KTM690/ Husky 701
A$196.00
Subframe Reinforcement kit KTM690/ Husky 701
Fits:
- KTM690 Enduro & SMC 2014+ including 2019
- Husqvarna 701 enduro & SMC all models
Upper assembly:
- Upper bolt caps(qty. 2) are made of AISI 4140 steel, heat treated (for added strength) then zinc coated (rust protection). That makes them virtually indestructible. Size of the head is standard – 27 mm, same as front axle nut. There is M6 threaded hole for OEM bolt holding plastic fairing. Bolt cap is designed to be slim so plastic fairing is not sticking out more then it does when OEM upper bolt is used.
- Upper bolts (qty. 2 + optional 2) are 12.9 machine bolts, zinc coated. These are much stronger then OEM upper tank bolts. 25 mm long, so 15 mm is threaded into the bolt cap, when properly torqued. NOTE: in kits for 2014-on bikes additional button head bolts are provided - those are for Husqvarna 701 bikes.
Lower assembly:
- Lower bushings (qty. 2) are made of strong plastic - polyamide with molybdenum, much stronger then OEM rubber lower bushings, yet gentle enough to be in close contact with plastic tank (rubber OEM upper bushings are kept, because completely rigid tank-frame connection wont be a good thing). Slightly different size, so they fit better.
- Sleeve(qty. 1) is made of AISI 304 stainless steel, without internal thread
- Lower bolt (qty. 1) design is only difference between kit for 2008-2013 and 2014-on bikes. For 2008-2013 bikes high quality M8x140 allen head 12.9 zinc coated bolt is provided. For 2014-on bikes custom M8x155 countersunk 10.9 zinc coated bolt is provided.
- Washers (qty. 1) are standard large M8 steel zinc coated washers and nut(qty. 1) is standard M8 steel zinc coated safety nut.
Perun Moto - Heel guards KTM690/Husqvarna 701
A$130.00
Sold out
Fits:
Heel guards kit KTM690/ Husky 701 all models
- Replacement for OEM plastic heel guards,
- Milled out of 6 mm aluminum AlMg3,
- Powder coated to matte black,
- Perfect strapping points for rack-less bags
- All edges chamfered by milling machine - no sharp edges,
- Pre-drilled hole for Kriega OS-rack loop,
- Button head bolts - your boots are safe,
- High quality mounting hardware provided - 10.9 grade zinc coated bolts, small and large washers,
- Easy installation using standard tools, no modification required,
- Price is for pair (left and right).
NEW Perun Moto Luggage Rack (suit) 701
A$135.00 - A$449.00
Only a few left!
NEW; Perun moto Tail Rack suits 701 all models
Features:
- Strong and durable design- upper made of 6 mm aluminium sheet (AlMg3 H22 - 5754) and bracket made of 5 mm aluminium sheet (AlMg3 H22 - 5754).
- Strap-friendly, chamfered, smooth edges of the rack and slots.
- Eighteen slots - strapping points for all kind of soft luggage, tool bags or small roll bags.
- Easy and seamless integration with rack-less bags
- Integrated G-hooks - made for quick mounting and dismounting of rack-less bags and easy refueling.
- Holes for Rotopax mount, for 1 gallon Rotopax fuel or water can.
- Perfectly sized - doesn't stick out - less chance to hurt rider in case of fall. Extension plate will be offered for riders in need of larger surface.
- Can be used with Vanasche Motorsport Pannier Racks
- All necessary hardware provided - high quality 10.9 zinc coated bolts and aluminium washers provided.
- High quality powder coating - Grey.
- Only 1.0 kg, including all mounting hardware
.
Perun moto KTM790 Luggage Rails (pair)
A$328.00
Only a few left!
Fits all KTM 790 Adventure bikes.
- Minimalist side racks, mounted instead of stock rear side covers.
- Sold as a Set (pair),
- RHS can be used as a platform for Tool tube, tool roll or small roll bags (5),
- LHS can be used as a platform for Tool tube, tool roll or small to medium roll bags (5-18 litres, depending on the bag),
- LHS is perfect platform for Kriega OS-Adventure packs (OS-6, OS-12 or OS-18),
- Mosko moto Fatty tool roll fits perfectly,
- Perfect stand-off for large rack-less systems (Mosko moto Reckless 80 or Giant Loop Siskiyou), to keep them away from silencer and rear swingarm
- Lightweight - made of 5 mm aluminium,
- All edges are chamfered,
- Powder coated to matte black,
- High quality hardware provided.
Perun Moto Luggage Rack (suit) KTM 690 2019+
A$160.00 - A$479.00
Only a few left!
Perun moto Tail Rack suits KTM 690 2019 +
Features:
- Strong and durable design- upper made of 6 mm aluminium sheet (AlMg3 H22 - 5754) and bracket made of 5 mm aluminium sheet (AlMg3 H22 - 5754).
- Strap-friendly, chamfered, smooth edges of the rack and slots.
- Eighteen slots - strapping points for all kind of soft luggage, tool bags or small roll bags.
- Easy and seamless integration with rack-less bags
- Integrated G-hooks - made for quick mounting and dismounting of rack-less bags and easy refueling.
- Holes for Rotopax mount, for 1 gallon Rotopax fuel or water can.
- Perfectly sized - doesn't stick out - less chance to hurt rider in case of fall. Extension plate will be offered for riders in need of larger surface.
- Can be used with Vanasche Motorsport Pannier Racks
- All necessary hardware provided - high quality 10.9 zinc coated bolts and aluminum washers provided.
- High quality powder coating - matte black.
- Only 1.0 kg, including all mounting hardware.
Perun Moto - Rear Brake Master Cylinder Guard
A$99.00
Sold out
Fits:
Rear Master Cylinder guard kit fits all models KTM690/ Husky 701 all models
- protects exposed rear brake cylinder and brake hoses,
- allows adjustment of rear brake cylinder position (brake pedal),
- made of 4 mm aluminium
- powder coated to black,
- mounting hardware provided - high quality zinc coated 10.9 grade bolts, aluminium spacer, washers and nut,
- easy installation using standard tools, no modification required,
Perun Moto Luggage Rack (suit) KTM 690 2008-2018
A$165.00 - A$510.00
Only a few left!
Perun moto Tail Rack suits KTM 690 2008-2018
Features:
- Strong and durable design- upper made of 6 mm aluminium sheet (AlMg3 H22 - 5754) and bracket made of 5 mm aluminium sheet (AlMg3 H22 - 5754).
- Strap-friendly, chamfered, smooth edges of the rack and slots.
- Eighteen slots - strapping points for all kind of soft luggage, tool bags or small roll bags.
- Easy and seamless integration with rack-less bags
- Integrated G-hooks - made for quick mounting and dismounting of rack-less bags and easy refueling.
- Holes for Rotopax mount, for 1 gallon Rotopax fuel or water can.
- Perfectly sized - doesn't stick out - less chance to hurt rider in case of fall. Extension plate will be offered for riders in need of larger surface.
- Can be used with Vanasche Motorsport Pannier Racks
- All necessary hardware provided - high quality 10.9 zinc coated bolts and aluminum washers provided.
- High quality powder coating - matte black.
- Only 1.0 kg, including all mounting hardware.
Instructions For Extension Plate
Perun Moto Billet Rack (suit) KTM 1x90 Large (New)
A$346.00
Only a few left!
Fits all 2013-2020 KTM 1X90 Adventure (R) bikes. Won't fit on KTM 790/890 bikes.
Successor of our most versatile luggage rack, now even better - it provides great support for duffle bags, rack-less saddlebags or hard top cases and due to it's 3D milled feature it now sits low and flush with the stock seat.
Additional spacers for removing passenger grab handles included!
- Twenty six slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
- Reasonably large top surface - approx. 30/19 (W) x 32 (L) cm of completely flat top surface (plus flanges for easy strapping),
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - CNC milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts - rack can be used to pull and push the bike,
- Perfect angle - due to CNC milled angled spacer platforms and angled countersunk holes, rack sits very low, flush with the stock seat and at the same angle as the stock seat (additional Subplate is not needed!)
- Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 or 2 gallon Rotopax fuel or water can,
- Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - limited compatibility with plastic Givi Trekker cases - email for details,
- SW-motech top case ready - pre-drilled holes for SW-Motech adapter kit (not included - check instructions for details),
- Kriega OS-Rack Loops ready - pre-drilled and chamfered holes for Kriega OS-rack loops, for perfect mounting of Kriega bags,
- 8 mm holes for RAM mount - for GoPro or other action cameras, one hole on each flange,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and powdercoated spacers,
- High quality powder coat - matte black powder coating (top of the line IGP Duraface powders),
- Weights approx. 1.0 kg, including mounting hardware.
Perun Moto Billet Rack (suit) KTM 790/890 Large (New)
A$358.00
Only a few left!
NOTE: Fits all KTM 790/890 Adventure R/"S"/Rally bikes. Won't fit on KTM 1X90 bikes.
Successor of our most versatile luggage rack, now even better - it provides great support for duffle bags, rack-less saddlebags or hard top cases and due to it's 3D milled feature it now sits low and flush with the stock seat.
Additional spacers for removing passenger grab handles included!
- Twenty six slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
- Reasonably large top surface - approx. 30/19 (W) x 32 (L) cm of completely flat top surface (plus flanges for easy strapping),
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - CNC milled out of aluminium-magnesium alloy, attached to the bike using M8 bolts - rack can be used to pull and push the bike,
- Perfect angle - due to CNC milled angled spacer platforms and angled countersunk holes, rack sits very low, flush with the stock seat and at the same angle as the stock seat (additional Sub plate is not needed!),
- Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 or 2 gallon Rotopax fuel or water can,
- Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - limited compatibility with plastic Givi Trekker cases - email for details,
- SW-motech top case ready - pre-drilled holes for SW-Motech adapter kit (not included - check instructions for details),
- Kriega OS-Rack Loops ready - pre-drilled and chamfered holes for Kriega OS-rack loops, for perfect mounting of Kriega bags,
- 8 mm holes for RAM mount - for GoPro or other action cameras, one hole on each flange,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and powder coated spacers,
- High quality powder coat - matte black powder coat (top of the line IGP Duraface powders),
- Weights approx. 1.0 kg, including mounting hardware.
Click the links below for more information:
Unique Features of the Perun Moto Billet Racks
Large rack verses small rack which one for you
Perun Moto Billet Rack (suit) KTM 790/890 Small (New)
A$304.00
Only a few left!
Fits all KTM 790/890 Adventure bikes.
This is our small and lightweight rack for 790/890 bikes
- Lightweight - only 400 gr,
- Low profile - sits low, close to the tail plastics; angled so it is flush with the stock seat,
- Sixteen slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
- Adequate top surface - approx. 25/13 (W) x 26 (L) cm of completely flat top surface, perfect for 5-10 liter soft bags,
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts,
- Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 gallon Rotopax fuel or water can,
- Kriega OS-Rack Loops ready - pre-drilled and chamfered holes for Kriega OS-rack loops, for perfect mounting of Kriega bags,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and spacers,
- High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
Additional spacers for removing passenger grab handles included!
Designed to be used without passenger grab handles, but it can be used with them too (caution - due to the small size of the rack, grab handles are not fully supported by the rack so use them with caution).
Click the links below for more information:
Unique Features of the Perun Moto Billet Racks
Large rack verses small rack which one for you
Perun moto KTM790/890/901 Norden Tie Down Bracket
A$114.00
Only a few left!
- Perfect tie down points for rack-less bags - slots are positioned according to Mosko moto Reckless 40 and Reckless 80 bags; may work well with other rack-less systems too,
- Low profile - replaces stock passenger foot peg brackets,
- Lightweight - only 100 gr,
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - milled out of 5 mm aluminium-magnesium alloy, attached to the bike using M8 bolts,
- High quality powder coat - matte black powder coated (top of the line IGP Duraface powders).
Perun Moto Billet Rack (suit) Husqvarna 901 Norden
A$358.00
Only a few left!
Note - this rack is same as our KTM790/890 large, but it comes with Norden-specific hardware kit.
---
Successor of our most versatile luggage rack, now even better - it provides great support for duffle bags, rack-less saddlebags or hard top cases and due to it's 3D milled feature it now sits low and flush with the stock seat.
Additional spacers for removing passenger grab handles included!
- Twenty six slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
- Reasonably large top surface - approx. 30/19 (W) x 32 (L) cm of completely flat top surface (plus flanges for easy strapping),
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - CNC milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts - rack can be used to pull and push the bike,
- Perfect angle - due to CNC milled angled spacer platforms and angled countersunk holes, rack sits very low, flush with the stock seat and at the same angle as the stock seat (additional Subplate is not needed!),
- Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 or 2 gallon Rotopax fuel or water can,
- Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - limited compatibility with plastic Givi Trekker cases - email for details,
- SW-motech top case ready - pre-drilled holes for SW-motech adaptor kit (not included - check instructions for details),
- Kriega OS-Rack Loops ready - pre-drilled and chamfered holes for Kriega, for perfect mounting of Kriega bags,
- 8 mm holes for RAM mount - for GoPro or other action cameras, one hole on each flange,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and powdercoated spacers,
- High quality powder coat - matte black powder coat (top of the line IGP Duraface powders),
- Weights approx. 1.0 kg, including mounting hardware.