Yamaha Tenere T700 Off-Road ABS Dongle LCD (Black & White screen) Euro5 plug
Fits;
- Tenere 700 2021-2022 (EU and US models). (Red Euro 5 plug)
- Tenere 700 2023 (US models). (Red Euro 5 plug)
Any accidents or incidents arising from operating your motorcycle in the incorrect ABS mode is your responsibility. Not the responsibility of the manufacture or reseller of this item.
Tenere 700 (EURO5, Monochromatic LCD dashboard, Red 6-pin diagnostic plug models) - New orders ready to ship in the Late of May 2024
Dongle is under development. Expected launch is before end of April 2024
Compatibility
- ... and all others with red six-pin diagnostic connector and monochromatic TFT screen.
How it works
The Dongle modifies the ABS settings behavior to what you would expect it to have directly from the manufacturer.
- It is expanding the functionality of the ABS button.
- It is adding the possibility to control Rear ABS separately.
- It is adding the ABS settings memory.
The new behavior will be as follows:
- A short push of stock "ABS" button will toggle between the rear ABS OFF and ABS ON.
- A long hold of stock "ABS" button will turn ABS completely OFF (front and rear ABS) - as on default bike.
- ABS settings are retained in memory even after turning the motorcycle OFF and ON.
Note: The changes of Rear ABS settings can be done even if the bike is moving! Changes of whole (Front + Rear) ABS system can be done only when the bike is not moving - this is unfortunately hard-coded in ECU.
Legality and safety
- Dongle does nothing more than what can be set by hand on the original instrument panel. It just combines all the procedure to one click or automates them after start-up (the memory).
- Please be careful during all riding and especially when you turn OFF the ABS. Do it only when you know what you are doing!
- FAQs:
- Can the Dongle damage anything on the bike in case of failure?
- In case of Dongle failure the bike will enter safe mode but nothing will be damaged. After disconnecting the malfunctioning Dongle everything will return to normal. The error symbol on dashboard will disappear after few short rides.
- Both CAN bus itself and devices connected to this bus are immune to failures of other connected devices so the Dongle failure will not damage them.
- Power is drawn from the tail light connector - it is nearest available 12V power that is switched with key switch. The Dongle failure only blow the fuse.
- However, this device interferes with other onboard electronic systems even if it is in disabled state. In case of its failure ABS and some info on the dashboard may be unavailable. By installing this device, you assume all responsibility for possible damage to health and property caused by the incorrect function of this device and the subsequent malfunction of other electronic systems of the motorcycle.
- Can the Dongle affect the warranty of the bike?
- The Dongle communicates trough the CAN bus data connection with the dashboard and ECU and it is designed to automotive standards. The ECU and the Dashboard is unaware of whether the message containing the required settings is transmitted by the Dongle instead of the dashboard. The messages are absolutely identical to those sent by display panel. Therefore, if you disconnect the Dongle prior to making motorcycle warranty claim, there will be no indication that this device was ever connected.
- However, installation of the Dongle is your responsibility. Do not take this as a guide on how to circumvent the motorcycle's warranty conditions. It's just a description of how the Dongle interacts with the bike. It is still a piece of equipment that is not approved by Yamaha as an original accessory. You are responsible for any problems caused by its installation and use.