790/890 and Norden 901 Stabilizer Sub mount and Bar Risers
A simple robust solution for the KTM 790/890 and Husqvarna 901** that provides an increase in handlebar height (1.0" rise) and the ability to install an under bar mounted Scott's Performance steering stabilizer.....or just use the riser portion for better ergonomics!
Features:
- upgraded tower/pin design!
- 1.0" Handlebar Rise (25.4mm) for better control and less cramped ergonomics
- Retains the two forward factory offset positions for adjustability (can reverse perches for a total of 4 different offsets)
- Custom Made Hardware Included to limit the number of tools required for mounting.
- Lifetime Guarantee* (see warranty page for details)
Fitment
- KTM 790/890 Adventure S, R, & Rally Models - All Years
- Husqvarna 901** - All Years
If you have already purchased the riser, you can find the additional parts needed to add a damper Contact us [email protected]
Important Notes:
**If purchasing for a Norden 901 you will have to trim the plastic cowl that goes over the front of the fuel tank that is blocking the threaded hole in the frame where the tower/pin mounts. You can add the bar riser with no cutting required but if you plan to mount a tower/pin for use with the Scott's damper you will need to notch out the plastic.
If you have your own Scott's Damper you can use either the +10mm stepped link arm or the +8mm stepped link arm to work with this kit. If you do not have one of these please select the appropriate option above to include a link arm and puller tool to remove your existing arm from the damper.
If you order this kit with a Scott's stabilizer everything necessary is included. All dampers provided by Vanasche Motorsports are the OFF-ROAD version.
It is advised to remove the factory stabilizer when installing the Scott's Damper.