Double Take Enduro mirror kits complete suit Husky and KTM (complete)
Kit includes:
Double Take Enduro Mirror head
- Almost Indestructible- Made from reinforced Zytel
- Excellent visibility- SAE spec convex lens
- Easy to fold, remove, or swap between bikes
- Housing guaranteed against breakage
- Mirror Diameter = 100mm (4")
- Overall length = 215mm (8.5")
- Made in the USA
- Recommended for applications where mirror will be extended most of the time, although it still folds very well
Better hold, less effort. The whole system has been engineered together to keep the mirror from moving, except when it has to in an impact.
New 3.5" double Take mirror arm
New Double take 3.5" mount arm
suits;
- New Double take ball mount 1.25" ball mounts and 1" ball mount mirror heads.
- will not work with old 1" ball mounts
- Arm has 2 different sized clamp ends 1" one end and 1.25' the other
- lighter and stronger for less movement when riding
2"/50MM Ram Arm
- Arm works with the Doubletake Adventure to provide great visibility.
Radial Ridges. The clamping surface at the base has radial ridges to hold the ball more securely. These ridges prevent the arm from unintentionally rotating relative to the base, but without mechanical interference that could be damaged under impact.
Asymmetrical Clamping. Because the ball diameters are different, the clamp is located off-centre toward the mirror. The larger base diameter creates more stiffness at the bottom, and the offset clamp grips the mirror tighter to equalize rigidity.
Easy Adjustment. Our low profile thumb nut is 25% longer to make adjustment easy even wearing gloves.
- Compatible. Mirror end 1" socket works with any 1" ball accessory (GPS, Camera, etc). Requires Doubletake ball kit for base.
1" Ball Mount KIT Includes
- 1 x 1.125" Ball Stud,
- 1 x 10mm x 1.25 bolt long
- 1 x 10mm x 1.25 bolt short
- 1 x Reverse Thread Bolt 10mm x 1.25
- 1 x 10mm x 1.5 short bolt,
- 1 x lock washer.
suits all KTM, BMW, Yamaha, Husqvarna, Honda
- Weight ball only: 20 grams
- Weight ball kit: 110 grams
- Materials: Billet Aluminium, Nitrile, hardened Steel
- Diameter: 1.125” (29mm)
- Height: 1.37" (35mm)
- Extension: 0.78" (20mm)
Universal Fit. Every ball kit includes 4 bolts to allow fitment to any bike and eliminate unsightly adapters.
Larger size. Our ball is 1.125”, and even that small increase in diameter makes a big difference in rigidity. This means you don’t have to overtighten the arm to keep it from moving while riding.
Won't Crush. Our aluminium-filled base ball, coated with high-quality nitrile rubber won’t degrade under extended compression. You won’t have to repeatedly adjust your mirrors, because both ends of the system are designed to last.
- Won't spin. We include a lock washer that secures the ball in relation to the bike.