Perun Moto R12 BAR CLAMP AMPS
Compatibility - fits all Yamaha Tenere 700, Ducati DesertX with Perun moto GPS R12 Mount and majority of bikes with 12 mm bar.
---
- Made for 12 mm bars - perfect for Yamaha Tenere 700 or Ducati DesertX with Perun moto GPS R12 Mount,
- AMPS bolt pattern - horizontal and vertical, for Garmin units and majority of phone holders, including QuadLock holders,
- Spacer included - for perfect fit even for larger GPS units, 15 mm high spacer bracket is included,
- Billet part - milled out of solid block of aluminum alloy,
- Lightweight - only 160 gr, including mounting hardware and spacer bracket,
- Formed threads - M4 threads - formed, not cut, for added durability.
- High quality powder coat - matte black powder coated (top of the line IGP Duraface powders).
- Stainless steel hardware - M5 countersunk bolts plus M4 bolts for GPS cradles or phone holders.
For Tenere T72024 and world Raid with TFT screen you can add our brace kit that will reduce movement of the top bar to almost nothing and only take 10 minutes to fit.
Perun Moto YAMAHA T7 TOP LUGGAGE RACK
Compatibility - fits all Yamaha Tenere 700 bikes including world Raid.
Doesn't fit with any pannier racks except Outback Motortek pannier rack!
Fits with Perun moto Yamaha Tenere 700 Side carriers.
---
- Very low profile - top rack sits low, close to the tail plastics and at the same angle as the stock seat;
- Twenty slots - strapping points for all kind of soft luggage, tool bags or roll bags, slots for perfect mounting of Mosko moto Reckless 80 or Giant loop Siskiyou rack-less bags,
- Strong and durable - side rails are made of stainless steel, top plate is milled out of 6 mm aluminum alloy.
- Adequate top surface - approx. 294 (W) x 256 (L) mm of completely flat top surface, perfect for 10-20 liter soft bags,
- Strap-friendly - chamfered, smooth edges - even on stainless steel side rails,
- Lightweight - less than 1.5 kg, including all mounting hardware,
- Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - for rider only (no pillion) -road only use, 5 kg max; won't work with seats higher than stock.
- SW-motech top case ready - pre-drilled holes for SW-Motech adapter kit (not included - check instructions for details) - for rider only (no pillion) - road only use, 5 kg max; won't work with seats higher than stock.
- Rotopax ready - pre-drilled holes for 1 gallon Rotopax mount (mount not included), for 1 gallon Rotopax fuel or water can,
- Kriega OS-Rack Loops ready - pre-drilled holes for Kriega OS-rack loops, for perfect mounting of Kriega bags,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and powder coated spacers,
- High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
- Outback Motortek pannier rack compatible -
Suits
Yamaha Tenere 700
2019,2020,2021,2022
Perun Moto YAMAHA TENERE 700 SIDE CARRIERS
Compatibility - fits all Yamaha Tenere 700 bikes.
Fits only with Perun moto Yamaha Tenere 700 Top luggage rack - doesn't fit with any other top luggage racks.
---
Please mind that Side carriers won't prevent soft bags from scuffing the plastics!
---
- Rack-less luggage support - these Side carriers are designed to be a support (standoffs) for large rack-less systems, like Mosko moto Reckless 80, Giant loop Siskiyou, Kriega OS-Base, Enduristan Blizzard XL or similar.
- Strong and durable - made of stainless steel and aircraft-grade aluminium alloy,
- Unique underside billet bracket - for added strength, we designed unique billet aluminium underside bracket, which greatly improves the strength of entire assembly,
- Strap-friendly - chamfered, smooth edges and bends with proper radii,
- Lightweight - less than 1.6 kg, including all mounting hardware,
- All necessary hardware provided - high quality 10.9 zinc coated bolts and powder coated spacers,
- High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
Suits
Yamaha Tenere 700
2019,2020,2021,2022,2023,2024 including World raid
Perun Moto YAMAHA TENERE 700 TIE-DOWN BRACKETS
Compatibility - fits all Yamaha Tenere 700 bikes.
---
- Perfect tie down points for rack-less bags - slots are positioned according to Mosko moto Reckless 80 bags and Giant loop Siskiyou soft panniers; may work well with other rack-less systems too,
- Low profile - replaces stock passenger foot peg brackets,
- Lightweight - only 100 gr,
- Strap-friendly - chamfered, smooth edges,
- Strong and durable - milled out of 5 mm aluminum-magnesium alloy, attached to the bike using M8 bolts,
- High quality powder coat - matte black powder coated (top of the line IGP Duraface powders).
Suits
Yamaha Tenere 700
2019,2020,2021,2022,2023,2024 and World Raid
B&B Tail Tidy – Yamaha XTZ690/ T7 Tenere
- Model: XTZ690 /Tenere 700 Year: 2020-2023
- 3 piece Cnc machined from high-quality alloy
- Designed to bolt straight into position with no modification to the bike
- Replace the bulky standard assembly with a sturdy neat unit
- Accepts the standard Yamaha blinkers and is supplied with a LED number plate light.
- Available in polished or black low lustre Powdercoat * NEW
ACERBIS HYDRATION PACK X-STORM 3 LITRE
Recommended by Mark These are great, use one myself on ever ride
Acerbis X-STORM Hydration Pack
- Backpack capacity 14.5 litres.
- 3L water bag allows for an average of 4 hours of autonomy.
- Ideal for those who need a water supply and want to replace the fanny pack with a convenient backpack.
- Front tool pocket with special pockets. Internal thermal pocket.
- Innovative "X" Closure System, with central quick release and 4 Velcro adjustments, cancels the swinging effect and simultaneously distributes the pressure of the shoulder straps evenly, on the chest and not on the shoulders, ensuring a free and unencumbered ride. Additional adjustment at the waist.
- Breathable fabric in back contact area.
- Bottle holder/side storage compartment
- Identification label (personal data)
- Easy to fill and clean thanks to the large sliding bar, which snaps on for a watertight seal.
ACERBIS HYDRATION PACK SATUH 2.5 LITRE
Acerbis Satuh Hydration Pack
- Capacity 9 litres
- Water bag capacity 2.5 litres
- Easy to clean water bag thanks to its large cap
- Straw with adjustable opening and closing valve
- Using rubber coated fabric to facilitate the cleaning of the backpack with a wet sponge, and increasing water resistance
- Ideal for those requiring a water supply and wish to replace the waist pack with a comfortable backpack
- Removable tool pocket and large utensils holder
- Internal elastic net pocket for storage and/or smartphone
- The innovative X closure system, with central quick release and 4 Velcro adjustments, eliminates the Dancing Monkey effect and simultaneously distributes the pressure of the shoulder straps evenly over the chest and not over the shoulders, ensuring a free and unobstructed ride
- Use of breathable fabric in back contact area
- Water bag can be removed
- Ideal for off-road use MOTOCROSS / ENDURO / ATV / TRIAL, E-BIKE / MTB
ACERBIS HYDRATION PACK SENTER 2 LITRE
Acerbis Senter Hydration Pack
CONSTRUCTION AND DESIGN:
- 7L backpack with 2L water bag, light medium/small size
EXTERNAL CONSTRUCTION:
- The innovative "X" closure system, with central quick release and 4 Velcro adjustments, cancels the oscillating effect and at the same time distributes the pressure of the shoulder straps evenly, on the chest and not on the shoulders, guaranteeing a free and unhindered driving.
- Helmet carrying system on the backpack.
- Outer fabric coated in rubber, to facilitate cleaning of the backpack using a wet sponge and which increases its water resistance.
- Three-dimensional breathable mesh fabric in the area in contact with the back, with reflective shielding to keep the water bag cool.
- Front and rear reflective inserts.
- Customizable label for Biker identification.
- 4 fixing points for the race number table.
INTERNAL CONSTRUCTION:
- Pockets dedicated to the transport of tools, keys, multitool, air chamber, pump.
- Power pockets designed to accommodate bars / gels.
- Large 180x140mm internal storage / smartphone pocket, positioned in the most protected part of the backpack.
- Internal car key holder hook.
WATER BAG:
- 2.0 litre capacity: allows for an average autonomy of 4 hours.
- 3.0 Easy to fill and clean thanks to the large sliding bar which hooks in order to guarantee watertight integrity.
- Straw with On / Off valve and removable tube with quick coupling for easy cleaning.
- Perfect for DIRT BIKE / E-BIKE / MTB / GRAVEL use.
ACERBIS HYDRATION PACK H2O 2 LITRE BLACK WHITE
Only a few left!
ACERBIS H2O HYDRATION PACK
- 10l. backpack with water bag, ideal for those who need a water reserve on offroad outings.
- Backpack capacity: 10 liters.
- Exterior with rubber-coated fabric panels to facilitate cleaning the backpack by a wet sponge and improve water resistance.
- Internal thermal pocket. External mesh pocket, small external pocket with zipper closure.
- Removable, multi-compartment tool pocket with "bolt-saver" magnet.
- Breathable fabric in the area in contact with the back.
- Water bag 2 liters, allows an average autonomy of 3 hours.
- SBS zippers.
=
Nelson-Rigg Trails End Riggpak Crash Bar/Tail Bag RG-2005
- LIFETIME WARRANTY
- Industry leading UltraMax® fabric with maximum UV protection
- Fits most crash bars, luggage racks and seats
- Universal mounting using hook & loop straps and or adjustable quick release buckles
- Integrated MOLLE system
- Measures: 17.5cm L x 10cm W x 30.5cm H
- Holds approx. 7 Liters
- *Waterproof liner sold separately
Kriega OS-BASE and Bags to suit Yamaha Tenere T700
Kriega OS Base is a Rack less luggage system that can be used with or without rear racks. Can also be used with Perun moto side carriers to keep bags away from side covers.
A new larger version of the popular OS-BASE that is specifically designed to fit the YAMAHA TENERE 700.
The OS-BASE is an ‘over the seat harness’ which allows OS-6, OS-12 or OS-18 ADVENTURE PACKS to be mounted as soft panniers. No heavy metal frames are required, this system provides a super-tough, lightweight carrying solution for the Yamaha Tenere T700 with no drilling or permanent bodywork alterations to the bike.
The modular design enables you to modify your luggage set-up to suit your ride – from a day’s single track to longer moto-camping adventure trips.
The TENERE BOLT-ON LOOPS included, attach to the bike’s subframe under the seat and provide 4 optional hook-on points. Used in conjunction with the additional loops on the OS-BASE they provide various mounting points for a 3 or more bag set-up, or can be used to mount an OS-PACK as a stand alone tail pack without the OS-BASE.
The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it.
- Designed specifically for the Yamaha T700
- OS Base is designed to fit over the rear of the seat
- No requirement for rear rack of side frames
- Light Weight and Tuff
• Carrying capacity from 12 to 54 Litres with centre pack mounting option.
• Heavy-duty Hypalon construction.
• Quick & easy to put on/take off.
• Reinforced stitching on all stress points.
• Aircraft grade alloy hooks.
• Non-slip cam buckles.
- Designed for use with OS-6, OS-12 or OS-18 bags
- 1 bag on each side and you can even mount another in the middle
• 10 YEAR GUARANTEE
In the kit
• Includes 2 x T7 strap mounts
• Includes 4 x Bolt on loops
Weight of OS base and fitting kit 800g
BODYWORK DAMAGE DISCLAIMER
Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. We strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on your motorcycle.
Kriega US-40 Rackpack
The latest addition to the Kriega universal-fit US-Drypack range, the US-40 is a double-entry, flexible storage version with all the same highly durable features plus much more
The latest addition to the universal-fit US-Drypack range, the US-40 is a double-entry, flexible storage version with all the same highly durable features plus much more.
The waterproof carrying capacity is variable from 28 to 40 litres. Set to 40 litres, the pack is perfect storage for a tent, roll mat, or sleeping bag coupled with a separate tunnel for tent poles making it an excellent moto-camping set-up. Alternatively, roll up both ends to reduce the capacity to 28 litres, ideal for waterproofs and warmer clothing on a shorter ride.
The new long hook straps and hook-back system enable the pack to be mounted directly to a tail rack or other structural parts on the bike. No rack, no problem. As with all US-Drypacks, the US-40 can securely mount across a pillion seat with the subframe loops included.
Hypalon reinforced strap mounts and webbing loops provide robust mounting locations for additional US-Drypacks, OS-Packs or Accessories. Also included is an adjustable shoulder strap for hands-free carrying to and from the bike.
FEATURES
- Double ended waterproof roll-top closure main compartment.
- Universal-fit to any type of motorcycle.
- Mount across a seat or rear rack
- Super-tough Hypalon + 420D Cordura® Lite construction
- Heavy-duty roll-top shields
- Hypalon reinforced strap mounts
- Separate tent pole tunnel (up to 50cm)
- Removable internal white liner (taped-seams)
- Carry on or off the bike as a shoulder bag with the removable shoulder strap included.
- 10 YEAR GUARANTEE
Weight 1400g