Vanasche Motorsports Side Stand Foot suits- KTM & Husqvarna Adventure bikes
Only a few left!
Side stand foot :
A two-piece part that combines a machined piece of billet aluminium base with a laser cut plate on top, powder coated black. This give you more surface area to better support your bike.
suits KTM 690,790,1090,1190 &1290 Husqvarna 701
Vanasche Motorsports KTM 390/790/890 GPS Mount 2019-2022
Only a few left!
Does not fit 2023 model
Easy to fit GPS mounting base designed specifically for the new KTM 790. Machined from 6061 alloy aluminum and anodized in your choice of black or orange color. Includes AMPS bolt pattern to securely mount Garmin's Rugged mount for Montana or Trail Tech Dock for Voyager Pro (others may fit as well with AMPS bolt pattern).
The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect viewing angle whether sitting or standing.
The adjustable windscreen of the 790 can be mounted in both Low and High positions without GPS interference. A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power terminals.
NEW! Vanasche Motorsports Stainless Steel Adventure Foot Pegs
Only a few left!
Over-sized and Lowered Rally Foot pegs fabricated from laser cut and machined components using high grade stainless steel. These TIG welded foot pegs feature a skeletal design to help shed mud/debris and boast platforms that are 11mm wider and 13mm longer than the factory foot pegs for improved comfort and control. The pegs are 1.0" (25mm) lower than factory. The outer 3 teeth around the curvature are 2mm higher than the rest to reduce side slip.
Fitment (Please Choose Appropriate Bike In Upper Right):
- KTM 690 - All Years
- Husqvarna 701 - All Years
- KTM 640/790/890/950/950SE/990/1090/1190/1290 - All Years
- Husqvarna 901 - All Years
Features:
- 1" Lower than Factory
- Heavy Duty Machined Clevis for added strength and perfect fitment
- The tread area is oversized: 2-3/8" Width x 3-3/4" Length
- Skeletal design for shedding of mud/debris
- Full oval internal stiffener and low profile underside gussets to maintain ground clearance and exceptional strength
- High Grade Stainless Steel Material
- Taller outer teeth to reduce side slip (taller by 2mm)
- Includes new pair of cotter pins (factory springs are reused)
Vanasche Motorsports Case Saver to suit KTM 790/890/Norden 901 - Black,Blue or Orange
Only a few left!
Case Saver to suit
- KTM 790/890 Adventure S & R models (Fits all years)
- KTM790 Duke (Fits all years)
- CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and stator cover. In addition to the protection it also provides a window to view your front sprocket condition and access to clean/remove debris unlike the stock cover. Each case saver comes with a proper KTM chain slider that helps reduce chain clatter at low engine speeds.
- Maximum Front Sprocket Size: 16 Teeth (factory size)
- Install instructions
Vanasche Motorsports Adventure Foot Pegs
Only a few left!
Vanasche CNC Adventure Foot pegs Made In USA
Oversized Billet Foot pegs machined from 7075 High Strength Aerospace Grade Aluminium paired with your choice of tread plate. Comfort & Control were the primary focus points in creating this product.
Fitment:
- KTM 790/890/1090/1190/1290 - All Years
- Husqvarna 901 Norden - All Years
Features:
- 3/4" Lower than Factory
- 1/4" Rearward Position
- The tread area is oversized: 2-3/8" Width x 3-7/8" Length
- 7075 Aluminium Alloy is Double the strength of 6061
- Includes new pair of cotter pins & springs
.
The set screws offer superior traction and gives you the ability to change out lengths and effectively alter the angle of the surface. The setscrew plates offer the highest level of grip/traction. Each set of setscrew pegs comes with an entire set of 10mm and 12mm long screws as well as new cotter pins and an allen wrench.
Vanasche Motorsports oversized Billet Foot pegs are machined from 7075 High Strength Aircraft Grade Aluminium paired with your choice of tread plate.
Fitment:
- KTM EXC pre 2016
- KTM690 all models
- KTM 640/790/950/950SE/990/1090/1190/1290 all years
- Husqvarna 701 all models
- Husqvarna 901 Norden
Features:
- 20mm Lower than Factory
- 8mm Rearward Position
- The tread area is oversized: 60.3 mm Width x 98.5mm Length
- 7075 Aluminium Alloy is Double the strength of 6061
- Includes new pair of cotter pins & springs
The set screws offer superior traction and gives you the ability to change out lengths and effectively alter the angle of the surface. The set screw plates offer the highest level of grip/traction. Each set of setscrew pegs comes with an entire set of 10mm and 12mm long screws as well as new cotter pins.
Vanasche Motorsports CNC brake pedal with or without pedal pad suits KTM790/890 Adv & Adv R
Heavy Duty Billet aluminium brake pedal machined for an exact fit for both the KTM 790 Adventure and Adventure R models.
- Pedal includes sealed deep groove ball bearings pressed in place. A significantly larger cross-section over the factory unit improves both strength from impacts as well as rigidity to remove the flex felt in the factory pedal.
- The tapped hole through the lever cross section used for the pedal stop bolt is a notorious weak point. We've added a significant material increase in this particular area for a pedal that won't let you down. We guarantee it.
OEM mounting hardware is reused. Factory pedal pad can be reused or we have a wide Variety of VM pads available.
790 Stabilizer Sub mount and Bar Risers
A simple robust solution for the KTM 790/890 and Husqvarna 901** that provides an increase in handlebar height (1.0" rise) and the ability to install an under bar mounted Scott's Performance steering stabilizer.....or just use the riser portion for better ergonomics!
Features:
- Now shipping with upgraded tower/pin design. See far right images.
- 1.0" Handlebar Rise (25.4mm) for better control and less cramped ergonomics
- Retains the two forward factory offset positions for adjustability (can reverse perches for a total of 4 different offsets)
- Factory KTM Hardware Included for Mounting
- Lifetime Guarantee* (see warranty page for details)
Fitment
- KTM 790/890 Adventure S, R, & Rally Models - All Years
- Husqvarna 901** - All Years
Important Notes:
If you have your own Scott's Damper you can use either the +10mm stepped link arm or the +8mm stepped link arm to work with this kit. If you do not have one of these please select the appropriate option below to include a link arm and puller tool.
If you order this kit with a Scott's stabilizer everything necessary is included.
It is advised to remove the factory stabilizer when installing the Scott's Damper.
Vanasche Motorsports CNC brake pedal suits Husqvarna 701 all models and KTM690 2011+
Only a few left!
Vanasche CNC Brake pedal ( made in USA) suits Husky 701 All models and KTM690 2011 on- You can use your old pad or add a CNC, anodised pad of your choice.
- P2 underside mount drops pad 10mm from standard pad
- P3 stepped pad offers 2 different heights for sitting and standing
- suits KTM690 including 2019&2020.
- suits Husqvarna 701 Enduro & SM including 2020.
- does not fit Duke
Vanasche Motorsports Rear disc guard Husqvarna Norden 901 KTM790/890
MADE IN USA
Machined from 1.50" aircraft grade 6061T6 aluminium plate this rear disc guard has been designed to never give up. Guaranteed not to bend or brake in the harshest environments.
In order to add some protection to the dangling ABS wire include a cable guide by MotoMinded with your purchase.
Fitment:
- KTM 790/890 Adventure S/R/Rally (All Years)
- Husqvarna 901 (All Years)
You can also opt for an ABS cable guide to add to the disc guard at the bottom of the page