Vanasche Motorsports 2019 KTM 690 fuel filler neck CNC (Black or Orange)
Only a few left!
Fits
KTM690 enduro and SM KTM690 2019-2024
Aluminium fuel tank neck comes in orange or black suit KTM690 2019-2021
- looks great
- no more problems with trying to unlock cap when mud and sand gets in to lock
- fits up with fuel sock to save you fuel pump
NOTE: when used with 2021 you will need to reposition seat release cable back to the original position from 2019 on LH side all parts are same so not difficult. or you can extend cable to rear of rear mudguard. You can give us a call to explain if you want
Vanasche Motorsports Rear disc guard Husqvarna/KTM 701/690
MADE IN USA
Machined from 1.25" aluminum plate this rear disc guard has been designed to take all the abuse you can throw at it. Guaranteed to give maximum protection in the harshest environments. suits all model 690R and 701
Colours: orange, blue, polished and black.
Vanasche Motorsports Side Stand Foot suits- KTM & Husqvarna Adventure bikes
Only a few left!
Side stand foot :
A two-piece part that combines a machined piece of billet aluminium base with a laser cut plate on top, powder coated black. This give you more surface area to better support your bike.
suits KTM 690,790,1090,1190 &1290 Husqvarna 701
Vanasche Motorsports Stand Bypass Dongle 701 Husqvarna & KTM690,1090,1190,1290
Only a few left!
2021 Dongle has change on EU models new dongle to suit NOW IN STOCK
The standard stand switch installed by KTM/Husqvarna is a safety device designed to ensure stand is up before you ride away. The switches fail and leave riders stranded in far from home. This dongle is designed to bypass the failed switch, by simply plugging it into the stand switch plug. This dongle can be carried as it is only slightly larger than a 20 cent piece. Easy install is stand switch fails just plug it in, and make sure the stand is up.
Disclaimer
It is the owners responsibility to ensure that the stand is in the up position before riding away when the dongle is in use. This component is not designed to be permanently installed as it bypasses a safety device.
Vanasche Motorsports Case Saver to suit 701/690 - Black, Blue or Orange
Case Saver to suit Husqvarna 701, Enduro & SM
- CNC machined from billet aircraft grade aluminium this case saver was built to protect your fragile engine case and clutch slave cylinder. Each case saver comes with OEM style hardware and chain slider.
- Maximum Front Sprocket Size: 16 Teeth
Vanasche Motorsports KTM 690 fuel filler neck CNC (Black or Orange) - to suit KTM690 2008-2018 (Black or Orange)
Aluminium fuel tank neck comes in orange or black suit KTM690
- looks great
- no more problems with trying to unlock cap when mud and sand gets in to lock
- fits up with fuel sock to save you fuel pump
Vanasche Motorsports Aluminium fuel tank filler neck and cap (blue or black) Fits all models including LR LR front tank
Only a few left!
Fits
fits Husqvarna 701 2016-2024
Aluminium fuel tank neck comes in blue or black suit 701 Husqvarna
Fits all model 701 rear tanks and LR front tank
- looks great
- no more problems with trying to unlock cap when mud and sand gets in to lock
- fits up with fuel sock to save you fuel pump
Vanasche Motorsports KTM 390/790/890 GPS Mount 2019-2022
Only a few left!
Does not fit 2023 model
Easy to fit GPS mounting base designed specifically for the new KTM 790. Machined from 6061 alloy aluminum and anodized in your choice of black or orange color. Includes AMPS bolt pattern to securely mount Garmin's Rugged mount for Montana or Trail Tech Dock for Voyager Pro (others may fit as well with AMPS bolt pattern).
The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect viewing angle whether sitting or standing.
The adjustable windscreen of the 790 can be mounted in both Low and High positions without GPS interference. A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power terminals.
NEW! Vanasche Motorsports Stainless Steel Adventure Foot Pegs
Only a few left!
Over-sized and Lowered Rally Foot pegs fabricated from laser cut and machined components using high grade stainless steel. These TIG welded foot pegs feature a skeletal design to help shed mud/debris and boast platforms that are 11mm wider and 13mm longer than the factory foot pegs for improved comfort and control. The pegs are 1.0" (25mm) lower than factory. The outer 3 teeth around the curvature are 2mm higher than the rest to reduce side slip.
Fitment (Please Choose Appropriate Bike In Upper Right):
- KTM 690 - All Years
- Husqvarna 701 - All Years
- KTM 640/790/890/950/950SE/990/1090/1190/1290 - All Years
- Husqvarna 901 - All Years
Features:
- 1" Lower than Factory
- Heavy Duty Machined Clevis for added strength and perfect fitment
- The tread area is oversized: 2-3/8" Width x 3-3/4" Length
- Skeletal design for shedding of mud/debris
- Full oval internal stiffener and low profile underside gussets to maintain ground clearance and exceptional strength
- High Grade Stainless Steel Material
- Taller outer teeth to reduce side slip (taller by 2mm)
- Includes new pair of cotter pins (factory springs are reused)
Vanasche Motorsports Case Saver to suit KTM 790/890/Norden 901 - Black,Blue or Orange
Only a few left!
Case Saver to suit
- KTM 790/890 Adventure S & R models (Fits all years)
- KTM790 Duke (Fits all years)
- CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and stator cover. In addition to the protection it also provides a window to view your front sprocket condition and access to clean/remove debris unlike the stock cover. Each case saver comes with a proper KTM chain slider that helps reduce chain clatter at low engine speeds.
- Maximum Front Sprocket Size: 16 Teeth (factory size)
- Install instructions
Vanasche Motorsports Adventure Foot Pegs
Only a few left!
New Design pivot area
Vanasche Motorsports oversized Billet Foot pegs are machined from 7075 High Strength Aircraft Grade Aluminium paired with your choice of tread plate.
Fitment:
- KTM EXC pre 2016
- KTM690 all models
- KTM 640/790/950/950SE/990/1090/1190/1290 all years
- Husqvarna 701 all models
- Husqvarna 901 Norden
Features:
- 20mm Lower than Factory
- 8mm Rearward Position
- The tread area is oversized: 60.3 mm Width x 98.5mm Length
- 7075 Aluminum Alloy is Double the strength of 6061
- Includes new pair of cotter pins (factory springs are reused)
The set screws offer superior traction and gives you the ability to change out lengths and effectively alter the angle of the surface. The set screw plates offer the highest level of grip/traction. Each set of setscrew pegs comes with an entire set of 10mm and 12mm long screws as well as new cotter pins.
Vanasche Motorsports Husqvarna 901 Norden GPS Mount
Only a few left!
Hands down the most rigid setup that mounts directly to the 901 factory GPS location.
Fitment:
- Husqvarna Norden 901 - All Years
Features:
- CNC machined from solid billet aluminum extrusions
- Tapered wall machining and form tapped holes
- AMPS bolt pattern (portrait and landscape orientations)
- Includes x4 stainless M4 screws
- Same viewing angle as TFT display
- Wire pass through hole at front for access to factory accessory wiring (ie charging)