Vanasche Motorsports KTM 390/790/890 GPS Mount 2019-2022
Only a few left!
Does not fit 2023 model
Easy to fit GPS mounting base designed specifically for the new KTM 790. Machined from 6061 alloy aluminum and anodized in your choice of black or orange color. Includes AMPS bolt pattern to securely mount Garmin's Rugged mount for Montana or Trail Tech Dock for Voyager Pro (others may fit as well with AMPS bolt pattern).
The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect viewing angle whether sitting or standing.
The adjustable windscreen of the 790 can be mounted in both Low and High positions without GPS interference. A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power terminals.
Perun Moto UPPER HANDLEBAR CLAMP 38/40X90 AMPS (suits most GPS mounts)
Only a few left!
Compatibility - Fits on majority of KTM and Husqvarna bikes with 38x90 or 40x90 bolt pattern - all MY KTM 690 Enduro and SMC-R, all MY Husqvarna 701 Enduro and Supermoto (fits on BRP sub-mounts too!), GasGas ES/SM 700, KTM 790 and 890 Adventure, KTM 1x90 Adventure bikes, Husqvarna 901 Norden and many more.
Works perfectly with Garmin Montana and Zumo series..
- AMPS bolt pattern - for vast number of GPS and phone holders, horizontal and vertical installation possible and approx. 30 mm of fore-aft positioning
- Perfectly suited for 2021+ 1290 Super adventure - enough room for "glove compartment" door to be fully opened and perfect placement of the GPS/phone relative to the dashboard,
- BRP Sub mount compatible - works with BRP Sub mount for KTM 690 Enduro and SMC-R, Husqvarna 701 Enduro and Supermoto,
- Billet part - milled out of aircraft grade aluminium-magnesium alloy,
- Durable - M4 threads for AMPS mounts are formed (not cut),
- Handlebar safe - powder coated, not anodized, which provides smooth contact with handlebar, without scuffs (top of the line IGP Duraface powders used),
- All necessary hardware provided - high quality M8 allan head zinc coated bolts and stainless M4 button head bolts.
Perun Moto DIRECT HANDLEBAR CLAMP (28.6 MM) AMPS (suits most GPS mounts)
Compatibility - fits all bikes with oversized handlebars (1-1/8" or 28.6 mm) and with split handlebar clamps.
Fits on 2021+ KTM 1290 Super Adventure, 2013-2020 KTM 1050, 1090, 1290 Adventure bikes (with stock handlebar clamps).
Works perfectly with Garmin Montana and Zumo series or QuadLock phone mount.
---
- AMPS bolt pattern - for vast number of GPS and phone holders, horizontal and vertical installation possible,
- Low profile and adjustable- easy rotation adjustment (through one easily accessible front bolt) and 60 mm of forward - aft adjustment of the upper plate,
- Billet part - milled out of aircraft grade aluminum alloy,
- Durable - formed (not cut) threads,
- Handlebar safe - powder coated, not anodized, which provides smooth contact with handlebar, without scuffs (top of the line IGP Duraface powders used),
- All necessary hardware provided - high quality M6 zinc coated bolts and stainless steel M5 and M4 bolts.
Vanasche Motorsports Side Stand Bypass Dongle KTM 790/890/390Adventure
Sold out
This does not work with 2024 models
The Side stand switch is a safety device, you should assess if it is safe to use this bypass dongle in your situation.
With the new era of over-complicated side stand sensors it is easy to be left stranded by a non-functioning safety device. Our product solves that inconvenience.
Fitment:
- KTM 790/890 Adventure R/S - All Years
Plug & Play Solution: Unplug the factory side stand sensor, plug in dongle.
NOTE:
Plug & Play Solution: Unplug the factory side stand sensor, plug in dongle. You must do this with the ignition OFF.
NOTE: The connection for this device is directly above the engine head. You must remove the fuel tank to access and install this dongle (pertains to 790/890/901).