Funnel Web filter 701/690 fitted with Rade Garage intake
Funnel Web Intake Filter - NOT pre oiled.
Suit 701 Husqvarna and KTM690 that are fittered with Rade Garage Air box.
New Rade Garage Evo2 Aluminium skid plate tool box suits KTM690R/701 Husqvarna
Sump Guard/Storage box
Manufactured by Rade Garage these offer great for protection of engine cases and has storage for your tools.
- The redesigned 3mm aluminium skid plate protects not only the front and the bottom part of the engine but also the water pump and both, brake lever and shift lever! The perfect handcrafted welding is adding stiffness to the KTM 690 and Husqvarna 701 skid plate. The new skid plate Evo2 weights only 2,6Kg. Updated version includes water resistant feature, easier opening access door on the front via 2 6mm thumb screws.
- Tools, spare parts and tubes can all fit in the tool box now with the size expanded from 2.7 litres on the old model to 4.7litres on the Evo2 version
- Together with the R/G Evo2 skid plate you get protection plate for the rear brake cylinder, which is an uncovered part that is unfortunately exposed from the factory. Our designs protects not only the engine but the brake cylinder on the KTM 690 or Husqvarna 701 as well. In the rear part of the skid plate Evo2 there are four pre-drilled holes, ready to your addition of any rubber or metallic protector of rear shock absorber
This fits all 701 Husqvarna and all 690 KTM's including 2021
NOTES
- You will need to reuse your OEM skid plate rear mounting pegs that bolt to the back of the plate and push into rubber bushings on frame
- NOTE: May Not fit with crash bars and does not fit with Power parts crash bars
Rade Garage 690 tank only 2019-2024
2019-2024 Rade Garage front 690 tank only with cap and outlet
The above product photos are used for illustration purposes only and may vary slightly.
Rade Garage Aluminium larger Footpegs
Sold out
- The R/G pegs are positioned fifteen millimetre lower than originals. It does not seems much, but it has significant impact on your comfort when riding long distances, because the knees are in more comfortable angle.
- 25% larger surface than original, helps handling the bike when riding in stand. And the pins hold your boots even in muddy terrain.
- The pegs fits
- KTM EXC pre 2016
- Husqvarna 2015-2016 TE/FE
- Husaberg 2008-2014 TE/FE
- KTM 990/1190/1050&1290 Adventure all
- KTM 790/Adventure all ( not 890 as springs require bending to work)
- KTM 690 Enduro & Husqvarna 701
- They are available in three colours: orange, blue and black
Physical size;
- 105mm long (out the side)
- 57mm wide (front to back)
- Foot pegs Platform is lower than a standard Foot peg by 15mm reducing bend in knees when sitting
- Manufactured from 6082 Grade Aluminium
Air filter Upgrade studs and nuts ( suits Rade Garage Air Box)
This Kit is our design to make filter changing easier.
- no more small screws
- easy to line up all the holes as studs hang through
- Use your standard 8mm T Bar to tighten
Kit contains:
- 2 x extended nuts or extended nuts with magnets fitted
- 2 x threaded studs
- 1 standard nut to use for installing studs
New you can choose to buy extended Nuts with magnets fitted so they don't fall out of your socket.
Rade Garage KTM690 K5 Rally kit (Carbon Tower & Tank) 2020-2024
Only a few left!
Rade Garage 2019-2024 Rally kit KTM 690 fairing/Tower kit & Rade Garage Auxiliary Front Fuel Tank
Rade Garage 2019-2024 KTM 690 fairing/Tower kit. Fits KTM690 2019 to 2024
What Riders Say about the Rade Garage Tower
- Good wind protection.
- Extra space for navigation gear such as GPS or Roadbook with tripmaster. All that can be easily mounted on the supplied bar.
- Road legal, super strong low and high beam LED lights with angel eyes to better enjoy your adventure rides or hobby rallies
The kit is fully bolted on and ready to plug and play. No drilling or permanent modifications. Whenever needed, you can simply reverse your bike back to the original setup.
Evolution of the fairing designed for KTM 690
The R/G fairing match the size and design of the KTM 690 enduro & SMCR, to keep its narrow line and easy handling when riding off-road and also to give you good wind protection when riding on the highway.
The windshield is injected, with improved finishing, integrate the shader reducing glare and integrate round edges to increase your safety. The side panels from flexible polycarbonate and are ready to survive some of your crashes.
Carbon tower with life-time warranty!
The main evolution is full carbon tower. The main benefit is improved handling of the bike because of significant weight reduction up in front. It is 800g lighter in comparison to the aluminium ones.
The R/G carbon tower is made of variable carbon layers. E.g. the attaching area is from eight layers and holes are reinforced by stainless steel plates. We trust the technology and production process, that we give a lifetime guarantee on our carbon tower!
Easy installation
Easy to fit plug and play wiring mounts using easy to install frame clamping system.
Around 4 hours to install complete kit.
Very little extra weight over the standard components removed and much better
lighting from 2 X LED ADR approved lights.
Tower Kit comes standard with Scott steering damper mountings
on our carbon tower!
All Tower kits come with
- All required mountings, including steering damper mount ( Scott damper not included)
- New Cree Chip head lights 70Winput
- Injected windshield
- Polycarbonate side panels
- Decals
- Tower , your choice carbon fibre or Aluminium
KTM690 2019-2024 Model 5.5 litre front tank.
Fits KTM690 2019-2024
Extra 100 km/60 miles fuel range
You get an extra 5,5 litres of gas (1,5 gallons) for your adventure trips. It means great freedom with total fuel range over 330km (205+ miles)!
Keeps original handling
Great benefit of our auxiliary tank solution is keeping the same dimensions and weight of your KTM 690 enduro. Simply the auxiliary tank is “hidden” in the bike and it does not add any extra dimensions to the bike so the handling of the bike is exactly the same as the factory 690.
Improved MultiAir filters
The small airbox uses the OEM intake flange yet provides better air in-flow. In combination with the foam filter from MultiAir designed specifically for the RADE/GARAGE, it gives you extra power (about 3-5HP) and torque (about 5-8NM) in 3000-6500RPM. Moreover it is easily accessible so replacement takes only few minutes. The filters are pre-oiled, but when they get dirty they are fully washable and reusable, making them environmentally friendly. The GP dust cover is supplied with each kit.
This tank kit fits KTM690 2019,-2024 models
Kit comes with
- Transparent tank and filler cap
- Brackets, bolts, etc.
- Small airbox – updated version
- 2pcs of foam air filter (MultiAir R/G)
- GP dust cover Twin Air
- Gas and vent tubes and Petcock
- Connection part to the main tank
- Thermo-Tec heat foil
click here for installation instructions
Please email to check if there may be any delays in supply of this item. click here for email
Rade Garage Air box Rubber Grommet for elbow
Rubber Grommet for Elbow in air box
The above product photos are used for illustration purposes only and may vary slightly.
(New) Rade Garage Air box single bolt air box
New Rade Air Box
single bolt hold air filter element in place
Kit comes as
- air box with inner cage and retaining bolt
- 2 x air filter elements
Air Filter skin for for Rade Garage air box in 701 and 690
Sold out
Air filter Skin suits 701 Husqvarna ,690 KTM all models with new generation single bolt Rade Garage air box. These air boxes use one screws in the middle of the filter to hold air filter down to the box. Would also fit over old 2 bolt filters
The above product photos are used for illustration purposes only and may vary slightly.
Multi Air Filter element for Rade Garage single bolt mounting air box
Air filter element suits 701 Husqvarna ,690 KTM all models with new generation single bolt Rade Garage air box. These air boxes use one screws in the middle of the filter to hold air filter down to the box.
Rade Garage twin air Air cleaner element for 2 bolt mounting air box
Air filter element
Suits
701 Husqvarna ,690 KTM all models with old generation Rade Garage air box.
These air boxes use 2 screws or nuts to hold air filter down to the box.
The above product photos are used for illustration purposes only and may vary slightly.
Funnel web Filter element for Rade Garage single bolt mounting air box
The premium Filter
Funnel Web suits 701 Husqvarna ,690 KTM all models with new generation single bolt Rade Garage air box. These air boxes use one screws in the middle of the filter to hold air filter down to the box.
Funnel Web filters do not come pre oiled, they require oil prior to use
The above product photos are used for illustration purposes only and may vary slightly.
Multi Air Filter Element with Single Bolt Cage Upgrade for Twin bolt Rade Garage Air Box
Air filter element and new single attachment (clip) internal cage to turn your old 2 bolt air box into a single bolt air box.
Note
Can not be used with older air boxes with the brass inserts for threaded holes.
Rade Garage KTM 690 Headlights 2010 -2021
Headlights suit Rade Garage fairing kit suits KTM 690 all models
Fuel Transfer Adapter for 690KTM or 701 Husky mounts around fuel pump
Adapter for connecting second fuel tank to KTM 690 or Husky 701. This unit mounts around the existing fuel pump and includes longer bolts. Simple to install; you will need to remove fuel pump from bottom of your tank and drill 2 holes. This unit has been used as a demo but is in new condition.
Rade Garage Windshield suits K4,F4,K3,F5,K5
Rade Garage windshield suits bikes fitted with the following Rade Garage fairing/tower kits:
- Husqvarna 701 F4
- KTM 690 2019 on K4
- KTM 690 up to 2018 K3
- KTM790
- KTM EXC 2020 on
- Husqvarna FE 2020on
Rade Garage Windshield headlight cover
Rade Garage windshield suits bikes fitted with the following Rade Garage fairing/tower kits:
- Husqvarna 701 K4
- KTM 690 2019 on F4
- KTM 690 up to 2018 F3
- KTM790
- KTM EXC 2020 on
- Husqvarna FE 2020on
Rubber windshield mounts for Rade Garage Windshields
5 mm Thread
How many in this pack; 1 x rubber mount
Rade Garage Carbon Iginition Cover for 690 2019 onward
2019 onward KTM690 Carbon ignition cover for 690 fitted with Rade Garage front tank.
Rade Garage 3D printed Cable Guide Front
It is our philosophy to always improve our products. We strive to make changes available as “an upgrade”, protecting your investments. This is one of those cases. Those that purchased the fairings in the past can order it on this page. Going forward, the brake hose guide is now included in our KTM 690 & Husqvarna 701 fairing kits.
Brake hose guide simple install
The install is straightforward simply attached the guide to the left front fork in its upper part. Insert the hoses into the bracket and slightly fix with the zip tie. For proper tighten slide down the brake hose guide to the lower triple clamp. As the fork is conical, the zip ties is tightened by itself.