Rade Garage Storage box for Husqvarna 701 with air box 2016-2026
Convenient storage space
Based on our Auxiliary Tank Kit development, the storage kit is designed for riders that don’t need the extra fuel for extended range, but rather appreciate extra storage space. It consists of the storage box and airbox upgrade. The under the seat storage box has volume of 6 liters. Our storage kit fits also into 701 LR model.
Foam filter
Small airbox uses the OEM flange for air intake and provides great fit to the engine. The foam filter made by MultiAir was designed specifically for our kit to ensure amazing dust prevention. The filter is easily accessible so replacement takes only few minutes. Foam filters are reusable, making them environmentally friendly. This solution also slightly improves the engine performance. The GP dust cover by Twin air are available but not included in kit.
Please email to check if there may be any delays in supply of this item. click here for email
The above product photos are used for illustration purposes only and may vary slightly.
Funnel Web filter 701/690 fitted with Rade Garage intake
Funnel Web Intake Filter - NOT pre oiled.
Suit 701 Husqvarna and KTM690 that are fittered with Rade Garage Air box.
Rade Garage twin air Air cleaner element for 2 bolt mounting air box
Sold out
Air filter element
Suits
701 Husqvarna ,690 KTM all models with old generation Rade Garage air box.
These air boxes use 2 screws or nuts to hold air filter down to the box.
The above product photos are used for illustration purposes only and may vary slightly.
New Rade Garage Evo2 Aluminium skid plate tool box suits KTM690R/701 Husqvarna
Only a few left!
Sump Guard/Storage box
Manufactured by Rade Garage these offer great for protection of engine cases and has storage for your tools.
- The redesigned 3mm aluminium skid plate protects not only the front and the bottom part of the engine but also the water pump and both, brake lever and shift lever! The perfect handcrafted welding is adding stiffness to the KTM 690 and Husqvarna 701 skid plate. The new skid plate Evo2 weights only 2,6Kg. Updated version includes water resistant feature, easier opening access door on the front via 2 6mm thumb screws.
- Tools, spare parts and tubes can all fit in the tool box now with the size expanded from 2.7 litres on the old model to 4.7litres on the Evo2 version
- Together with the R/G Evo2 skid plate you get protection plate for the rear brake cylinder, which is an uncovered part that is unfortunately exposed from the factory. Our designs protects not only the engine but the brake cylinder on the KTM 690 or Husqvarna 701 as well. In the rear part of the skid plate Evo2 there are four pre-drilled holes, ready to your addition of any rubber or metallic protector of rear shock absorber
This fits all 701 Husqvarna 2016-2024 and all 690 KTM's including 2024
NOTES
- You will need to reuse your OEM skid plate rear mounting pegs that bolt to the back of the plate and push into rubber bushings on frame
- NOTE: May Not fit with crash bars and does not fit with Power parts crash bars
Fuel Filler Filter Sock to suit Rade Garage Front Tank (will not fit tanks purchased after 6/2022)
Only a few left!
Clean fuel is the answer to long fuel pump an injector life, cheap insurance for your bike with a design that allows for fast filling of your tank.
Rade Garage 701 Rally Kit 2016-2025 (Carbon Tower & Tank)
Only a few left!
Rade Garage Husqvarna Rally kit F5 kit . Tower and tank kits
New F5 Carbon Fibre Tower now available 800g lighter
Rade Garage 2016-2024 Husqvarna701 F5 fairing/Tower kit.
What Riders Say about the Rade Garage Tower
- Good wind protection.
- Extra space for navigation gear such as GPS or Roadbook with tripmaster. All that can be easily mounted on the supplied bar.
- Road legal, super strong low and high beam LED lights with angel eyes to better enjoy your adventure rides or hobby rallies
The kit is fully bolted on and ready to plug and play. No drilling or permanent modifications. Whenever needed, you can simply reverse your bike back to the original setup.
Evolution of the fairing designed for Husqvarna 701
The R/G fairing match the size and design of the Husqvarna 701, to keep its narrow line and easy handling when riding off-road and also to give you good wind protection when riding on the highway.
The windshield is injected, with improved finishing, integrate the shader reducing glare and integrate round edges to increase your safety. The side panels from flexible polycarbonate and are ready to survive some of your crashes.
Carbon tower with life-time warranty!
The main evolution is full carbon tower. The main benefit is improved handling of the bike because of significant weight reduction up in front. It is 800g lighter in comparison to the aluminium ones.
The R/G carbon tower is made of variable carbon layers. E.g. the attaching area is from eight layers and holes are reinforced by stainless steel plates. We trust the technology and production process, that we give a lifetime guarantee on our carbon tower!
All Tower kits come with
- All required mountings, including steering damper mount ( Scott damper not included)
- New Cree Chip head lights 70Winput
- Injected windshield
- Polycarbonate side panels
- Decals
- Tower , your choice carbon fibre or Aluminium (special order)
Benefits
- Easy to fit plug and play wiring mounts using easy to install frame clamping system.
- Around 4 hours to install complete kit.
- Very little extra weight over the standard components removed and much better
- lighting from 2 X LED ADR approved lights.
- Tower Kit comes standard with Scott steering damper mountings
LR models are supplied without side panels
- 701 Husqvarna Fairing kit. Easy to fit plug and play wiring mount directly to existing frame mounts. Around 4 hours to install . Very little extra weight over the standard components removed and much better lighting from 2 X LED lights.
Tank Kit
Fits; Husqvarna 701 2016-2024
Extra 100 km/60 miles fuel range
You get an extra 5,5 litres of gas (1,5 gallons) for your adventure trips. It means great freedom with total fuel range over 330km (205+ miles)!
Keeps original handling
Great benefit of our auxiliary tank solution is keeping the same dimensions and weight of your KTM 690 enduro. Simply the auxiliary tank is “hidden” in the bike and it does not add any extra dimensions to the bike so the handling of the bike is exactly the same as the factory 701.
Improved MultiAir filters
The small airbox uses the OEM intake flange yet provides better air in-flow. In combination with the foam filter from MultiAir designed specifically for the RADE/GARAGE, it gives you extra power (about 3-5HP) and torque (about 5-8NM) in 3000-6500RPM. Moreover it is easily accessible so replacement takes only few minutes. The filters are pre-oiled, but when they get dirty they are fully washable and reusable, making them environmentally friendly. The GP dust cover is supplied with each kit.
This tank kit fits Husqvarna 701 2016,-2024 models
Kit comes with
- Transparent tank and filler cap
- Brackets, bolts, etc.
- Small airbox – updated version
- 2pcs of foam air filter (MultiAir R/G)
- GP dust cover Twin Air
- Gas and vent tubes and Petcock
- Connection part to the main tank
- Thermo-Tec heat foil
You can use KTM style petcock into Husky tank utilizing the factory installed connection point. On models pre 2021
Tank installation PDF doc for Australia
The above product photos are used for illustration purposes only and may vary slightly.
Check with me on stock but generally 2-3 weeks delivery if none on the shelf.
Please email us to check any delays with supply of this item. click here for email
Air filter Upgrade studs and nuts ( suits Rade Garage Air Box)
This Kit is our design to make filter changing easier.
- no more small screws
- easy to line up all the holes as studs hang through
- Use your standard 8mm T Bar to tighten
Kit contains:
- 2 x extended nuts or extended nuts with magnets fitted
- 2 x threaded studs
- 1 standard nut to use for installing studs
New you can choose to buy extended Nuts with magnets fitted so they don't fall out of your socket.
Rade Garage Husqvarna 701 F5 Fairing/Tower Kits 2016-2026
Only a few left!
Rade Garage 2016-2026 Husqvarna701 F5 fairing/Tower kit.
New Carbon Fibre Tower now available 800g lighter
Adventurise your 701 with a screen and tower.
What Riders Say about the Rade Garage Tower
- Good wind protection.
- Extra space for navigation gear such as GPS or Roadbook with tripmaster. All that can be easily mounted on the supplied bar.
- Road legal, super strong low and high beam LED lights with angel eyes to better enjoy your adventure rides or hobby rallies
The kit is fully bolted on and ready to plug and play. No drilling or permanent modifications. Whenever needed, you can simply reverse your bike back to the original setup.
Evolution of the fairing designed for Husqvarna 701
The R/G fairing match the size and design of the Husqvarna 701, to keep its narrow line and easy handling when riding off-road and also to give you good wind protection when riding on the highway.
The windshield is injected, with improved finishing, integrate the shader reducing glare and integrate round edges to increase your safety. The side panels from flexible polycarbonate and are ready to survive some of your crashes.
Carbon tower with life-time warranty!
The main evolution is full carbon tower. The main benefit is improved handling of the bike because of significant weight reduction up in front. It is 800g lighter in comparison to the aluminium ones.
The R/G carbon tower is made of variable carbon layers. E.g. the attaching area is from eight layers and holes are reinforced by stainless steel plates. We trust the technology and production process, that we give a lifetime guarantee on our carbon tower!
All Tower kits come with
- All required mountings, including steering damper mount ( Scott damper not included)
- New Cree Chip head lights 70Winput
- Injected windshield
- Polycarbonate side panels
- Decals
- Tower , your choice carbon fibre or Aluminium (special order)
Benefits
- Easy to fit plug and play wiring mounts using easy to install frame clamping system.
- Around 4 hours to install complete kit.
- Very little extra weight over the standard components removed and much better
- lighting from 2 X LED ADR approved lights.
- Tower Kit comes standard with Scott steering damper mountings
LR models are supplied without side panels
701 Husqvarna Fairing kit. Easy to fit plug and play wiring mount directly to existing frame mounts. Around 4 hours to install . Very little extra weight over the standard components removed and much better lighting from 2 X LED lights.
Click here for installation instructions
Please email to check if there may be any delays in supply of this item. click here for email
The above product photos are used for illustration purposes only and may vary slightly.
Pre Order normal takes 2-3 weeks
Windshield mounting Screws, washers and rubber nuts (suit Rade Garage)
Rade Garage tower windshield mounting screws and accessories
- Plastic Washers for under head of screws;
Due to the softer material the screws are less prone to coming loose
- Black M5 screws
- M5 rubber nuts
Fits Rade Garage Tower kits KTM690 all, Husqvarna 701 all, GasGas 700 all, KTM790/890 all
Rade Garage Windshield suits K4,F4,K3,F5,K5
Rade Garage windshield suits bikes fitted with the following Rade Garage fairing/tower kits:
- Husqvarna 701 F4
- KTM 690 2019 on K4
- KTM 690 up to 2018 K3
- KTM790
- KTM EXC 2020 on
- Husqvarna FE 2020on
Rade Garage Windshield headlight cover
Rade Garage windshield suits bikes fitted with the following Rade Garage fairing/tower kits:
- Husqvarna 701 K4
- KTM 690 2019 on F4
- KTM 690 up to 2018 F3
- KTM790
- KTM EXC 2020 on
- Husqvarna FE 2020on
Rade Garage Air box Rubber Grommet for elbow
Rubber Grommet for Elbow in air box
The above product photos are used for illustration purposes only and may vary slightly.
(New) Rade Garage Air box single bolt air box
New Rade Air Box
single bolt hold air filter element in place
Kit comes as
- air box with inner cage and retaining bolt
- 2 x air filter elements
Air Filter skin for for Rade Garage air box in 701 and 690
Air filter Skin suits 701 Husqvarna ,690 KTM all models with new generation single bolt Rade Garage air box. These air boxes use one screws in the middle of the filter to hold air filter down to the box. Would also fit over old 2 bolt filters
The above product photos are used for illustration purposes only and may vary slightly.
Multi Air Filter element for Rade Garage single bolt mounting air box
Air filter element suits 701 Husqvarna ,690 KTM all models with new generation single bolt Rade Garage air box. These air boxes use one screws in the middle of the filter to hold air filter down to the box.
Multi Air Filter Element with Single Bolt Cage Upgrade for Twin bolt Rade Garage Air Box
Air filter element and new single attachment (clip) internal cage to turn your old 2 bolt air box into a single bolt air box.
Note
Can not be used with older air boxes with the brass inserts for threaded holes.
Funnel web Filter element for Rade Garage single bolt mounting air box FWF513
The premium Filter
Funnel Web suits 701 Husqvarna ,690 KTM all models with new generation single bolt Rade Garage air box. These air boxes use one screws in the middle of the filter to hold air filter down to the box.
Funnel Web filters do not come pre oiled, they require oil prior to use
The above product photos are used for illustration purposes only and may vary slightly.
Rade Garage 701 tank only
2016-2021 Rade Garage front Husqvarna 701 5.5L tank only. Includes cap and outlet
The above product photos are used for illustration purposes only and may vary slightly.
Rade Garage 3D printed Cable Guide Front
It is our philosophy to always improve our products. We strive to make changes available as “an upgrade”, protecting your investments. This is one of those cases. Those that purchased the fairings in the past can order it on this page. Going forward, the brake hose guide is now included in our KTM 690 & Husqvarna 701 fairing kits.
Brake hose guide simple install
The install is straightforward simply attached the guide to the left front fork in its upper part. Insert the hoses into the bracket and slightly fix with the zip tie. For proper tighten slide down the brake hose guide to the lower triple clamp. As the fork is conical, the zip ties is tightened by itself.
Rade Garage Husqvarna 701 Headlights
Headlights suit Rade Garage F4 fairing kit suits Husqvarna 701 2016-2020
Fuel Transfer Adapter for 690KTM or 701 Husky mounts around fuel pump
Adapter for connecting second fuel tank to KTM 690 or Husky 701. This unit mounts around the existing fuel pump and includes longer bolts. Simple to install; you will need to remove fuel pump from bottom of your tank and drill 2 holes. This unit has been used as a demo but is in new condition.
Rade Garage Husqvarna 701 side panels F4/F5
Side Panels for Rade Garage F4 fairing kit suits Husqvarna 701 2016-2022
- RIGHT HAND
- LEFT HAND
- OR BOTH
Rade Garage GPS mount for Tower
Adapter to mount Garmin holder to the crossbar
Small adapter enables simple mounting of the Garmin Montana and Garmin 276Cx holder to the crossbar on our navigation tower. And many others with the spacing of the holes are 38mm and 30mm. See the drawing in the gallery below.
The crossbar has 12mm diameter so the adapter will work on many other bikes with the same size crossbar. The adapter is included in all of our fairing kits.
Precision made & smart design
The adapter is made of injection molded reinforced plastic. You have one horizontal and two vertical options to place your Garmin navigation on your bike with RADE/GARAGE adapter.
And of course you can mount and tighten at any angle that works for you, depending on standup or sit-down riding, sun position etc.