Vanasche Motorsports Rear disc guard Husqvarna/KTM 701/690
MADE IN USA
Machined from 1.25" aluminum plate this rear disc guard has been designed to take all the abuse you can throw at it. Guaranteed to give maximum protection in the harshest environments. suits all model 690R and 701
Colours: orange, blue, polished and black.
Vanasche Motorsports Side Stand Foot suits- KTM & Husqvarna Adventure bikes
Only a few left!
Side stand foot :
A two-piece part that combines a machined piece of billet aluminium base with a laser cut plate on top, powder coated black. This give you more surface area to better support your bike.
suits KTM 690,790,1090,1190 &1290 Husqvarna 701
Vanasche Motorsports Stand Bypass Dongle 701 Husqvarna & KTM690,1090,1290
Only a few left!
2021 Dongle has change on EU models new dongle to suit NOW IN STOCK
The standard stand switch installed by KTM/Husqvarna is a safety device designed to ensure stand is up before you ride away. The switches fail and leave riders stranded in far from home. This dongle is designed to bypass the failed switch, by simply plugging it into the stand switch plug. This dongle can be carried as it is only slightly larger than a 20 cent piece. Easy install is stand switch fails just plug it in, and make sure the stand is up.
Disclaimer
It is the owners responsibility to ensure that the stand is in the up position before riding away when the dongle is in use. This component is not designed to be permanently installed as it bypasses a safety device.
Vanasche Motorsports Case Saver to suit 701/690 - Black, Blue or Orange
Case Saver to suit Husqvarna 701, Enduro & SM
- CNC machined from billet aircraft grade aluminium this case saver was built to protect your fragile engine case and clutch slave cylinder. Each case saver comes with OEM style hardware and chain slider.
- Maximum Front Sprocket Size: 16 Teeth
Vanasche Motorsports Aluminium fuel tank filler neck and cap (blue or black) Fits all models including LR LR front tank
Only a few left!
Fits
fits Husqvarna 701 2016-2024
Aluminium fuel tank neck comes in blue or black suit 701 Husqvarna
Fits all model 701 rear tanks and LR front tank
- looks great
- no more problems with trying to unlock cap when mud and sand gets in to lock
- fits up with fuel sock to save you fuel pump
NEW! Vanasche Motorsports Stainless Steel Adventure Foot Pegs
Only a few left!
Over-sized and Lowered Rally Foot pegs fabricated from laser cut and machined components using high grade stainless steel. These TIG welded foot pegs feature a skeletal design to help shed mud/debris and boast platforms that are 11mm wider and 13mm longer than the factory foot pegs for improved comfort and control. The pegs are 1.0" (25mm) lower than factory. The outer 3 teeth around the curvature are 2mm higher than the rest to reduce side slip.
Fitment (Please Choose Appropriate Bike In Upper Right):
- KTM 690 - All Years
- Husqvarna 701 - All Years
- KTM 790/890/1090/1190/1290 - All Years
- Husqvarna 901 - All Years
Features:
- 1" Lower than Factory
- Heavy Duty Machined Clevis for added strength and perfect fitment
- The tread area is oversized: 2-3/8" Width x 3-3/4" Length
- Skeletal design for shedding of mud/debris
- Full oval internal stiffener and low profile underside gussets to maintain ground clearance and exceptional strength
- High Grade Stainless Steel Material
- Taller outer teeth to reduce side slip (taller by 2mm)
- Includes new pair of cotter pins (factory springs are reused)
Vanasche Motorsports Adventure Foot Pegs
Only a few left!
New Design pivot area
Vanasche Motorsports oversized Billet Foot pegs are machined from 7075 High Strength Aircraft Grade Aluminium paired with your choice of tread plate.
Fitment:
- KTM EXC pre 2016
- KTM690 all models
- KTM 790/1090/1190/1290 all years
- Husqvarna 701 all models
- Husqvarna 901 Norden
Features:
- 20mm Lower than Factory
- 8mm Rearward Position
- The tread area is oversized: 60.3 mm Width x 98.5mm Length
- 7075 Aluminum Alloy is Double the strength of 6061
- Includes new pair of cotter pins (factory springs are reused)
The set screws offer superior traction and gives you the ability to change out lengths and effectively alter the angle of the surface. The set screw plates offer the highest level of grip/traction. Each set of setscrew pegs comes with an entire set of 10mm and 12mm long screws as well as new cotter pins.
Vanasche Motorsports Bar Risers or steering damper mounts Husqvarna 701
Only a few left!
Say goodbye to twisted bars! A rock solid solution for the Husqvarna 701 and 701 LR
You have a choice of
- Bar Risers only
- Bar Risers with damper mounting plate
- Bar Risers damper mounting plate frame mount and pin
- Bar Risers damper mounting plate frame mount, pin and Scott Damper
Description
- Relaxed Ergonomics from increased bar height (15mm or 30mm)
- Immediate confidence boost with more race inspired control/feeling
- Two bar offsets (fwd/rwd) are achievable by flipping risers 180*
- Narrow submount allows clearance for fork tubes allowing you to slide the forks up if front end lowering is desired
- Solid Aluminum Cone Inserts
- 12mm Alloy Bolts
- Billet Machined Submount, Risers, Top Clamp all anodized in black colour
- Scott's Tower & Pin
- Works with Scott's Steering Stabilizer
- Works with 1-1/8" diameter bars only
The factory bar setup with rubber cones, 10mm bolts, and thin aluminium components leaves much to be desired.
We replace the factory rubber cones with aluminium inserts in favour of a rigid bar setup and replace the mounting bolts with larger 12mm alloy socket head cap screws. The subplate, risers, and top clamp are machined from billet aluminium and anodized black.
Select from the two bar rise amounts listed (+15mm or +30mm). The riser blocks are reversible allowing for a forward/rearward offset.
790 Stabilizer Sub mount and Bar Risers
A simple robust solution for the KTM 790/890 and Husqvarna 901** that provides an increase in handlebar height (1.0" rise) and the ability to install an under bar mounted Scott's Performance steering stabilizer.....or just use the riser portion for better ergonomics!
Features:
- Now shipping with upgraded tower/pin design. See far right images.
- 1.0" Handlebar Rise (25.4mm) for better control and less cramped ergonomics
- Retains the two forward factory offset positions for adjustability (can reverse perches for a total of 4 different offsets)
- Factory KTM Hardware Included for Mounting
- Lifetime Guarantee* (see warranty page for details)
Fitment
- KTM 790/890 Adventure S, R, & Rally Models - All Years
- Husqvarna 901** - All Years
Important Notes:
If you have your own Scott's Damper you can use either the +10mm stepped link arm or the +8mm stepped link arm to work with this kit. If you do not have one of these please select the appropriate option below to include a link arm and puller tool.
If you order this kit with a Scott's stabilizer everything necessary is included.
It is advised to remove the factory stabilizer when installing the Scott's Damper.
Vanasche Motorsports CNC brake pedal suits Husqvarna 701 all models and KTM690 2011+
Only a few left!
Vanasche CNC Brake pedal ( made in USA) suits Husky 701 All models and KTM690 2011 on- You can use your old pad or add a CNC, anodised pad of your choice.
- P2 underside mount drops pad 10mm from standard pad
- P3 stepped pad offers 2 different heights for sitting and standing
- suits KTM690 including 2019&2020.
- suits Husqvarna 701 Enduro & SM including 2020.
- does not fit Duke
Vanasche Motorsports CNC brake pedal Pads for Vanasche pedals suit all Husky 701, KTM690 & KTM790
Vanasche CNC Brake pedal Pads come in 2 styles
- P2 underside mount drops pad 10mm from standard pad
- P3 stepped pad offers 2 different heights for sitting and standing
- P4 Oversized surface area over the stock pedal pad. This pad has two mounting positions so that you can position it further forward or rearward